Open & Use the Case

 

Step 1: Opening the Access Panel

Locate the "Open Here" Tab, this is your starting point.

Punch Through the Tab: Carefully press your finger against the tab to punch it through. This action will create an initial opening to facilitate the next steps.

Cut or Tear Along the Perforated Line: Using this initial opening, either cut with a knife or tear along the perforated line extending in both directions from the tab. Ensure that you are following the line precisely to create a neat opening.

Fold Along the Solid Line: Once the perforated line has been cut or torn, fold the material along the adjacent solid line to fully open the access panel.

Warning: If you're using a knife to cut along the perforated line, be extra cautious to avoid personal injury. Additionally, be mindful of the pressure and depth of your cut to prevent any damage to the targets within the box.

Easily open carrying case for ground control targets and spikes. Convenient and organized storage for survey equipment. Save time and money with this professional solution. Lightweight and easy to carry, ideal for fieldwork and drone mapping applications. Eco-conscious design with a focus on efficiency and cost savings.
Step 2: Loading Ground Fastening Spikes
Insert the ground fastening spikes into the designated slots located on the top and left side of the carrying case. Position the spikes directly into the slots and then slightly tilt them towards the outer wall to prevent any damage to the DronePoints inside. The case is equipped to hold up to 20 spikes, each up to 8 inches in length. It is advisable to loosen the targets within the case prior to inserting the spikes, as they might have settled or compacted during transit. 		Insert spikes and nails into the carrying case for convenient and organized storage. Save money and time with this efficient solution for survey and drone mapping professionals. Eco-conscious design, lightweight, and easy to carry. Ensure you have everything you need for fieldwork, making your job easier and more efficient.

Step 5: Use the Carrying Handle

Find the designated handle area on the top of your carrying case. Press down firmly along the perforated edges to punch through, then fold along the solid line to form a durable handle. This feature enhances the portability of your DronePoints carrying case, making it even more convenient for fieldwork.		 DronePoints carrying case carried by surveyor. Easily carry both targets and ground fastening nails or spikes. Nails sold separately. No more fumbling with unorganized ground control targets and nails! Eco-conscious drone ground control point targets for photogrammetry and lidar aerial mapping. High visibility stencils for concrete and asphalt surfaces.

Step 4: Easy Removal of DronePoints Targets

For seamless access to DronePoints targets, especially the first few which may be compacted, here's a tip:

Place the carrying case face down with the access panel up. Gently slide your fingers under the top target and lift it straight upwards. A slight twist can help de-nest and ease the target out. This method ensures you can quickly and smoothly begin your field setup without any trouble.

 Easily remove ground control point target from the carrying case. Fast and efficient solution for survey and drone mapping professionals. Save time and money with this organized and eco-conscious design. Lightweight and easy to use, making fieldwork simpler and more efficient. Ensure high accuracy in your geospatial data collection.